The deck the show plays on.
Rock-100 is the crystal-clear, 100% solids, zero-VOC epoxy body coat at the heart of the Rockstars system. Pour it, spread it, back-roll it — it lays down glass-smooth and cures rock-hard as a primer, a flake bond coat, a chip broadcast base, or a stand-alone clear finish on prepped concrete.
Built for
- Garage floors
- Basements
- Commercial spaces
- Showrooms
- Warehouses
- And more
Why crews spec it
- Crystal clear finish. Non-clouding pour that shows off the substrate or the flake broadcast underneath.
- High gloss & self-leveling. Notch-squeegee and back-roll for a mirror-flat surface.
- High build. One coat lays down thick — real coverage, real film, real durability.
- 100% solids · Zero VOC. No shrinkage, no interior-air complaints.
- UV resistant. Holds up on well-lit interior slabs; top with RS Poly A·B Kit for direct sun exposure.
- Chemical & abrasion resistant. Rated for oil, salt, cleaners, and hot-tire traffic.
Technical specs
- Mix ratio: 2 parts A to 1 part B
- Full pot life @ 75 °F (24 °C): 20–30 min
- Work time @ 75 °F (24 °C): 30–40 min
- Recoat window @ 75 °F (24 °C): 6–12 hours
- Cure — light foot traffic: 24 hours
- Full cure: 5–7 days
- VOC content: 0 g/L (calculated as mixed)
Available formats
- 1 Gallon Kit · 2 Gallon Kit · 5 Gallon Kit
- 10 Gallon Kit · 15 Gallon Kit
- 30 Gallon Kit · 55 Gallon Kit
Application notes
Substrate must be structurally sound, clean, dry and profiled (CSP 2–3 typical). Mix Part A + Part B for the full mixing time, dump — do not scrape the sides of the bucket — and pour immediately. Back-roll to release air. On slabs with elevated moisture, prime with Rockstars MVB first.
Safety
Causes serious eye irritation. May cause skin irritation. May cause respiratory irritation. Read the Safety Data Sheet before use. Wear appropriate PPE and ventilate the workspace. Keep out of reach of children.
Real jobs. Real contractors. Real epoxy. Built in Chicago. Made to last.
